Parts

36 E-Optimized Factory forks are made specifically for the rigors of E-Bikes with a stouter chassis and longer durability due to adding material to strengthen critical areas. The design also uses tuning originally done for Enduro use, which fits the needs of the E-MTB and overall E-Bike uses. - Genuine Kashima Coating on upper tubes - FIT GRIP2 Damper and FLOAT air spring - E-Bike Chassis - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment

Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability. - Genuine Kashima Coating on upper tubes - FIT damper and FLOAT EVOL air spring - Low friction seals for improved performance - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment

Competition drives innovation, and as cross-country athletes and course designers push the boundaries of lightweight components, 32 Step-Cast Factory rises to meet the demand. A redesigned crown for 2020 increases stiffness to the same level as the trail-proven 34. The distinct shape of the Step-Cast chassis uses a narrow stance to save weight and the step design makes room for the spokes and brake rotor. - Genuine Kashima Coating on upper tubes - 32 mm upper tubes and ample bushing overlap for a quality ride - Hollowed out lower legs provide even more weight savings - FIT4 damper and FLOAT air spring

Few things would piss off Newton more than the Monarch XX. Simply put, no other shock packs more energy-efficient performance in a lighter weight package – one that seemingly defies Newton’s so-called "laws" of physics. But the Monarch XX does exactly that, providing the ability to lock-out rear suspension via a single bar-mounted XLoc Sprint button. The 100% hydraulic remote lever and system is completely sealed, so unlike cable-actuated units – Monarch XX is impervious to contamination. If Newton were alive today, we doubt he'd be that stoked to go back to the drawing board with his theories. But a few miles on the Monarch XX sure would help inspire a new way of thinking, and riding. - WEIGHT: 205g - DAMPING: External rebound and XLoc Full Sprint hydraulic remote lockout with floodgate - CONFIGURATIONS: 152x31mm, 165x38mm, 184x44mm, 190x51mm, 200x51mm, 200x57mm, 216x63mm - REBOUND DAMPING: Rapid Recovery - SPRING: Standard, High Volume, Standard with High Volume Eyelet, High Volume with High Volume Eyelet - SPRING ADJUST: Air pressure via single Schrader valve - SHAFT MATERIAL: 7075 aluminum - SHAFT DIAMETER: 9mm - BODY MATERIAL: Hard anodized, forged aluminum with sag gradients - BODY FINISH: Fast Black - OTHER: Weight based on 165x38mm, standard air can, no hardware

Premium performance at down-to-earth prices. Judy now includes all of the 30mm MTB and E-MTB forks, with axle and steerer options to match any spec. Silver level forks give you stiff steel upper tubes and TurnKey lockout. Features - New graphics package with E-MTB endorsement option (15x110mm) - TurnKey lockout gives 'on/off' control - Fits Tires up to 2.8" (15x110mm) - Fast Black finished 30mm steel upper tubes couple stiffness and lightweight with a premium look - Plush coil spring or highly tunable Solo Air spring - Includes Right PopLoc Remote - Disc brake compatible - Offset: 51mm (29-inches) - Steerer Diameter: 1.5-inch Tapered

Premium performance at down-to-earth prices. Judy now includes all of the 30mm MTB and E-MTB forks, with axle and steerer options to match any spec. Silver level forks give you stiff steel upper tubes and TurnKey lockout. Features - New graphics package with E-MTB endorsement option (15x110mm) - TurnKey lockout gives 'on/off' control - Fits Tires up to 2.8" (15x110mm) - Fast Black finished 30mm steel upper tubes couple stiffness and lightweight with a premium look - Plush, highly tunable Solo Air spring - Disc brake compatible - Offset: 51mm (29-inches) - Steerer Diameter: 1.5-inch Tapered

Meet the new standard for hard-hitting, heavy-duty braking. We added 15% extra piston power and 30% more volume in the lever reservoir, ensuring peak performance for the full run. And with SwingLink and Lever Pivot Bearing technologies, lever feel remains smooth and progressive, no matter how hard the pull. Go deeper and grab more power. - Designed specifically for heavy-duty demands. - Pivot bearing offers crisp lever feel and a fatigue-free ride. - Metallic pads come standard for more power and longer wear.

The Highline 3 delivers infinite adjustment, smooth feel, and easy installation. Details - Premium Trelleborg sealing - Exclusive Igus LL-glide bearings and keys - Jagwire cable and housing - Self-contained hydraulic cartridge delivers industry-leading quality and reliability - Internal routing - Quick connect mechanism for ease of cable installation - Linear actuator for quick return speed - 2-bolt standard head - Remote sold separately

The X-Fusion Manic post uses internal cable routing and was designed around a low-profile seat cradle and seal collar to fit a broad range of frames. The mechanism is air-sprung and hydraulically locked. The remote can be run on the left or right, above or below the handlebar, but is optimized as a left shifter replacement for 1x drivetrains. - Cable activated, hydraulic action, infinitely adjustable travel - Double key-way design prevents lateral twisting - Double bolt clamp with a wide range of seat angle adjustment. Fits both standard and 7 x 9 mm Carbon Rails - Sealed cartridge internals for quick replacement - Low profile head-seal and saddle clamp increase useable travel

G2 RSC is the half-ton pickup truck of the mountain bike brake world—dependable, go anywhere, do anything, plenty of power when you need it, and all of the features you need. The new G2 RSC is based on the SRAM Code design, so it puts Code-like power and modulation into a mini-Code package. And, of course, the signature Guide lever-feel and contact-point adjustability ensures that this brake works great for every rider. The G2 RSC presents a rider-oriented offering with an alloy blade, lever pivot bushings, stainless steel hardware. - Useful reach and contact point adjustments for every type of rider. We design our brakes to give each individual rider distinct control of their ride. - We added stiffness in the caliper and a new pad compound that offers more bite to really deliver the Mini-Code feel. - Engineered for easy installation

- Powerful 4-pistons calipers for safe performance at high speeds, even on heavy e-bikes - The eSTOP system is based on the MAGURA MT features. Due to the combination with SPORT brake pads and the MDR-C or MDR-P rotors it even offers higher braking forces and stability. - This is MAGURA's top model for more demanding e-bike use

Shimano Ultegra R8000 Series Chainrings are designed for use with Shimano's 11-speed Ultegra crankset.

Competition-oriented and customizable for refined fit, feel, and power transfer. Details - Durable alloy body - Durable cast steel wings - Integrated traction pad technology to optimize the shoe/pedal interface - Ribbed body for better traction when unclipped - Chamfered edges to reduce rock-strikes - Hex alloy endcap and bashguard - 4-sided entry / superior mud shedding - Customizable float & release angle - Premium bearings & double seal system Specs - Body Material: 6061-T6 aluminum - Cleats: Premium brass cleats with shims included - Endcap: Hex alloy - Inner Bearing Type: Igus LL-glide bearing - Max Rider Weight: No restriction - Outer Bearing Type: Enduro cartridge bearing - Q-factor: 52mm - Release Angle: 15° / 20° - Spindle Material: Forged scm 435 chromoly steel - Spring Material: 300 series stainless steel - Warranty: 5 years - Weight: 320g per pair - Wing Material: 17-4PH stainless

Classically sprung and with a shape vetted by generations of cyclists, Brooks' Flyer is prepared to go the distance. The Flyer uses two rear springs to make flying over rough pavement or dirt roads a joy. This saddle is a favorite of long-distance tourists and city-bound commuters alike. And, of course, the Flyer Aged features Brooks' full-grain, premium leather, and trademark rivets for the ultimate in comfort, style, and durability.

Sleek, easy to use, yet immensely powerful. Code R packs a winning punch with a reliable DirectLink lever mated to Code’s new oversized four-piston caliper. SRAM’s signature ergonomics are supplemented by the tool-free reach adjust for a fit to each riders’ needs, to unleash Code’s superior braking power, consistency, and modulation. - Four aluminum pistons provide the stopping power and excellent heat management - Stainless steel heat shield breaks the thermal connection between the brakes pads and the caliper body, which reduces fluid temperature - Forged aluminum lever body and blade - Bleeding Edge design for easier maintenance - Includes steel-backed sintered metal pads

For enduro riding and racing, it's all about the Crank Brothers Mallet E pedals. Winner of a Design & Innovation Award for 2016, this pedal features a concave platform for a secure, grippy foothold, and six adjustable pins per side for even more security. The adjustable traction pad interface keeps you in contact with the pedal so you can focus on your line. Four-sided entry ensures your foot will catch quickly and easily, as well as helping the Mallet E shed mud like no other. A 52mm q-factor is your best friend on tight trails, because who wants to be clotheslined by a tree? Not you, that's for sure. Throw in chamfered edges to ward off rock strikes, and a customizable float and release system and you're ready to shred. Specifications: - spindle material: forged scm 435 chromoly steel - body material: 6061-T6 aluminum - wing material: 17-4PH stainless - spring material: 300 series stainless steel - release angle: 15° / 20° - q-factor: 52mm - inner bearing type: igus LL-glide bearing - outer bearing type: enduro cartridge bearing - adjustable pins: 6 per side for grip - endcap: hex alloy - cleat: premium brass cleats with shims included - weight: 419g per pair

The Shimano Deore XT CS-M8100 12-speed cassette is optimized with rider-tuned wide-range and close step gear combinations for MTB excellence. - Shift ramp designs provide fast and smooth shifts by HYPERGLIDE+ technology - Light and stiff construction reduces cassette inertia resulting in faster acceleration and increased chain security - Designed with a Shimano Micro Spline body that features smaller and more widely distributed splines to limit cog damage on freehub - Cassette Body Type: Shimano Micro Spline - Cassette Cogs: 10-12-14-16-18-21-24-28-33-39-45-51 - Drivetrain Speeds: 12 - Range: 10-51

Rebuild seal kits for Fox rear suspension service and repair. - Includes parts needed for rebuild

The Wheels Mfg PF30 Outboard bottom bracket will give you all of the same benefits as their well-loved Outboard style BBs. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 24mm spindle diameter cranks (Shimano, FSA, Etc.) in PF30 frames without the need for adapters. - Bearings: Enduro Angular Contact - Color: Red - Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB - Bottom Bracket Shell Width (mm): 68mm - 73mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 158g

KMC X12 chains feature a double X bridge shape for fast and smooth shifting. - Compatible with SRAM 12-speed systems - Double X bridge shape with inner and outer plate chamfering for smooth and fast shifting - Mushroom riveted pins for the highest pin power and allows shifting under heavy loads - 1/2 x 11/128 - 126 Links

TEMPO ARGO R5 is a versatile endurance road saddle with a short-nosed design and generous ischial support that encourages stability. Where a traditional saddle shape encourages riders to shift their position frequently for better leverage, Argo puts the rider in a more planted position, making for greater stability and better weight distribution. Tempo Argo's short length allows the rider to sit further forward without placing undue pressure on sensitive tissues. It also features an ergonomic cutout that was developed using detailed pressure analysis and input from medical experts. Argo is our most versatile saddle shape and each version suits different riding styles. As the endurance riding option, Tempo Argo has been engineered to deliver a riding feel that suits the balanced geometry of today's all-purpose road machines. The padding is made from fizik's proprietary Type 2 foam formulation, slightly thicker around the ischial sit bones area to support a more upright riding posture. The cushioning is slightly softer and more progressive than the type we use on our racing saddles, providing more long-distance comfort. Argo is a product of the Fizik Concepts program, a cross-disciplinary collaboration of leading industry experts and academics carrying out research and analysis on technology, design, physiology, and bike-fitting in search of ways to improve cycling performance. - Tempo: Versatility road series designed for the most enjoyable riding experience - Argo: versatile short nose saddle that encourages stability and reliefs pressure on soft tissue area - R5: a combination of a ride compliant carbon-reinforced nylon shell and an S-Alloy rail - Wingflex: the shell's side edges flex and adapt to rider's inner legs movement - Type 2 foam: progressive cushioning, with lower compression modulus - Tempo Argo R5 regular 150mm - endurance cycling bike saddle SPECIFICATIONS: TEMPO ARGO R5 150mm - Length: 260mm - Width: 150mm - Weight: 241g - Height at 75mm width: 45mm - Length from nose to 75mm width: 103mm - Rail: 7 x 7mm - Tempo Argo R5 large 160mm - endurance comfortable road cycling saddle SPECIFICATIONS: TEMPO ARGO R5 160mm - Length: 260mm - Width: 160mm - Weight: 247g - Height at 75mm width: 45mm - Length from nose to 75mm width: 103mm - Rail: 7 x 7mm

Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.

External English (BSA) threaded bottom bracket for 73mm shells. Wheels Mfg uses only Enduro bearings and silicone seals for the most durable and smoothest bottom brackets available. Fully serviceable. Includes: (2) - Enduro Silicone dust seals (1) - 2.5mm aluminum BB cup spacers for use with 68mm wide BB shell (1) - 1.8mm aluminum BB cup spacers for use with 68mm wide BB shell (1) - 0.7mm aluminum BB cup spacers for use with 68mm wide BB shell (2) - 0.5mm crank spindle spacers (2) - 1.0mm crank spindle spacers (1) - Wave Washer Direct replacement for SRAM/Truvativ GXP bottom brackets! - Bearings: Enduro Angular Contact - Color: Red - Bottom Bracket/Frame Interface: ISO/English or BSA Threaded (1.37 in x 24 TPI) - Bottom Bracket Shell Width (mm): 68-73mm - Bottom Bracket Shell I.D.: 33.6-33.9 mm - Crank Spindle Type: GXP (SRAM, Truvativ, Etc.) - Crank Spindle Diameter: 22/24mm - Weight: 116g

With an integrated chain stabilizer mechanism, the Shimano GRX derailleur provides a quieter experience with shifting security and precision on mixed terrain. For rides on smooth surfaces, the derailleur features and ON/OFF switch for the chain stabilizer. The RD-RX812 rear derailleur is compatible with MTB cassettes with a max cog size of 42T. - Adjustable, gravel-tuned chain stabilizer prevents chain slapping and drops - Switch stabilizer ON/OFF to match the terrain - Silent and uninterrupted rear shifting on rough terrain - Smooth and reliable mixed-surface shifting - Compatible with current road Dual Control Levers - High cog: Max. 11T/Min. 11T - Low cog: Max. 42T/Min. 40T - Total capacity: 31T

The Shimano Deore XT RD-M8100/M8120 rear derailleur is designed to provide smooth and stable shifting for 12-speed MTB drivetrains. - Offers fast and shockless shifting - The low-profile design includes a bumper added to the derailleur pulley cage - Shimano Shadow RD+ technology reduces chain slap and creates a quieter drivetrain - Includes large, 13T pulley - Long cage is designed to be used with 1x12 drivetrain systems - Rear Derailleur Mount Type: Shimano Rear Direct Mount, 10x1 Standard - Drivetrain Speeds: 12 - Cage Length: Long - Chain Wrap Capacity (teeth): 41 teeth - Largest Cog: 51 - Weight: 284 g - Rear Der/Shifter Compatibility: Shimano Mountain

With an integrated chain stabilizer mechanism, the Shimano GRX derailleur provides a quieter experience while delivering shifting security and precision on mixed terrain. For rides on smooth surfaces, the derailleur features an ON/OFF switch for the chain stabilizer. The RD-RX810 rear derailleur is compatible with road cassettes with a max cog size of 34T. - Adjustable, gravel-tuned chain stabilizer prevents chain slapping and drops - Switch stabilizer ON/OFF to match the terrain - Silent and uninterrupted rear shifting on rough terrain - Low cog: Max. 34T/Min. 30T - High cog: Max. 11T/Min. 11T - Total capacity: 40T - Compatible with current road Dual Control Lever - Maximum front chainring range: 17T

The KEO 2 MAX pedal is an excellent example of LOOK's design experience. With its wide contact area and composite body, it offers state-of-the-art technology for full power transfer, in an affordable package. - Technology: Spring - Cleats: Keo Grip - Retention: 8 to 12 - Body: Composite - Spindle: Chromoly+ - Platform material: Stainless Steel - Platform area: 500mm² - Platform width: 50mm - Q Factor: 53mm - Stack height + cleats: 17.3mm (11 + 6.3mm) - Weight (pedal): 130g - Weight (pair + cleats): 328g

Reliable performing, Shimano MTB-compatible rear derailleur with chain stabilizer. Compatible with cassettes up to 50T. Features: - Extra Long Cage - 12-speed - Shimano MTB 12-speed compatible (1.02 rear shift ratio) - Chain stabilizer reduces chain bouncing on rough terrain - Aluminum cage, B-knuckle, B-bolt and outer link - Bearing-equipped composite pulleys - Weight: 249g

A top-notch Shimano MTB-compatible rear derailleur with chain stabilizer. Compatible with cassettes up to 52T. Features: Light-weight clutch equipped MTB rear derailleur. - Overlength Cage - 12-speed - Shimano MTB 12-speed compatible (1.02 rear shift ratio) - Chain stabilizer reduces chain bouncing on rough terrain - Aluminum cage, B-knuckle, B-bolt and outer link - Bearing-equipped composite pulleys

The SRAM Rival 1 X-Horizon rear derailleur is engineered for smooth, reliable shifting action—from the larger upper pulley offset to the 12-tooth X-Sync pulley wheels. By eliminating unwanted chain movement, X-Horizon shifts faster, puts an end to ghost shifting, and reduces shift force and chain slap. And with Cage Lock technology, wheel removal and installation are easier than ever. • X-Horizon design reduces shift force while eliminating ghost shifting and chain slap • 12-tooth X-Sync pulley wheels • Large upper pulley offset automatically adjusts chain gap • Sealed cartridge bearings Aluminum cage • Technologies: X-Horizon, Exact Actuation, X-Sync, Roller Bearing Clutch, Cage Lock • Medium cage: 11-26 through 11-36 cassettes • Long cage: 10-42 cassette