Wheels

Product specs: - 36 hole count - Front and rear specific - 28.5mm wide - Welded - 20", 24" - 395g front rim 392g rear rim - Also available in 24", black only

Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels. - 14mm x 1mm (1411-AN) sold in pairs - All others sold individually

Do you need to replace the right lock washer seal on your Alfine SG-S700 internally geared hub? If you're not sure, it might not be a bad idea, as contamination from damaged or worn seals is the kryptonite of virtually maintenance-free internally geared hubs.

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

• Replacement aluminum quick release skewers

• Replacement aluminum quick release skewers

The Muc-Off Tubeless Rim tape is made from their proprietary performance material with a pressure-sensitive adhesive to provide just the right amount stretch whilst maintaining durability and strength needed to create a lasting airtight seal. Semi-transparent material makes locating the valve hole easy.

Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3

Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: JoyTech 10mm x 26, rear hub - Compatible with 10mm x 26 axle - Cone Wrench Size: 15mm - Threads: 10mm x 26 - Diameter: 17.0mm - Length: 13.8mm - Note: O-ring / seal not included. - 1 cone per bag COMPATIBLE HUBS: - JoyTech 10mm x 26, rear hub - Taiwanese hubs with 10mm x 26 axle

The buyer's choice for wheel builders looking to save weight. The nipples are available with or without DT Pro Lock, a patented liquid inside the nipple thread that makes the connection between the nipple and spoke extremely durable. It pairs perfectly with any wheel, though all-brass nipples are recommended for e-bike use. - Weight: starting at 20g for 64 nipples

- Extra security against theft - 5mm hex CrMo axle

- AL6061 alloy tubeless Presta valve - Includes 2 O-rings, one standard profile and one aero profile, for an airtight seal on any rim - Removable valve core for installing sealant - Additional replacement valve cores sold separately - Sold individually

Made for trekking bikes with rim brakes, the SHIMANO DEORE T610 front hub offers durable and reliable performance thanks to its high-quality sealing and angular contact bearings. - Double contact sealing - Super polished bearing races for low-friction rolling

Stan's Cross Country 29er Rim Strip converts standard tubed wheels to tubeless so you can reap the benefits. Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's rim strips create a tight seal with the tire bead, reducing the instances of "burping". Plus, you won't miss dealing with flat tires and you'll save money on tubes!

- Straight gauge spokes with a proprietary grade of stainless steel that is as good or better than the materials used by the world’s most renowned spoke makers. - Sized and dimensioned specifically for BMX.

These kits convert Crankbrothers rear hubs to 12mm thru axle and 10mm QR spacing. - 135×10QR – 2017 3 & 11 kit (SKU 99204) compatible with: Level 3 & 11 4th generation (2017+) hubs - 142/148×12TA – 2017 3 & 11 kit (SKU 99205) compatible with: Level 3 & 11 4th generation (2017+) hubs - weight 23g per pair

The buyer's choice for wheel builders looking to save weight. ProLock nipples contain a special adhesive compound (by Loctite) which is activated when a spoke is threaded into the nipple, forming a durable bond. - 32 nipples weigh approximately 30 grams

Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many BMX hubs - Type: Solid Axle - Threads: 9.5mm x 26tpi - Diameter: 9.5mm - Length: 187mm - 1 axle per bag

Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many BMX hubs - Type: Solid Axle - Threads: 9.5mm x 24tpi - Diameter: 9.5mm - Length: 180mm - 1 axle per bag

Tannus Armour Tubeless inserts are the result of years of top level multi-cell foam manufacturing mixed with extensive professional riding experience. At the heart of Tannus is the patented Aither Technology; a multi-cell foam compound that forms the structure of the Armour. The inserts are designed to displace small impacts while offering a spring-like rebound for a smooth yet playful ride. - 3% Faster than standard tubeless - Flexible sidewall stabilizing "Wings" for smoother ride quality, with 50% more vibration damping - 20mm of rim protection - Not a sealant sponge – keeps sealant where it belongs - Easy Installation (5 Minutes, No tools required) - 150g - About as much as a standard tube (a little lighter)

Tannus Armour Tubeless inserts are the result of years of top level multi-cell foam manufacturing mixed with extensive professional riding experience. At the heart of Tannus is the patented Aither Technology; a multi-cell foam compound that forms the structure of the Armour. The inserts are designed to displace small impacts while offering a spring-like rebound for a smooth yet playful ride. - 3% Faster than standard tubeless - Flexible sidewall stabilizing "Wings" for smoother ride quality, with 50% more vibration damping - 20mm of rim protection - Not a sealant sponge – keeps sealant where it belongs - Easy Installation (5 Minutes, No tools required) - 150g - About as much as a standard tube (a little lighter)

Quick Release Model • Model Number: HB-M8000 • Series: DEORE XT • Disc Rotor Mount: Center Lock Disc • Axle Type: QR • Axle Length: 100mm • Axle Diameter: 14mm • Contact Sealing: Labyrinth & Contact • Spoke Holes: 32H • Center to Flange (Right): 41mm • Center to Flange (Left): 44mm 15x100mm Thru-Axle Model • Model Number: HB-M8010 • Series: DEORE XT • Disc Rotor Mount: Center Lock Disc • Axle Type: 15mm E-Thru • Axle Length: 100mm • Axle Diameter: 17.5mm • Contact Sealing: Labyrinth & Contact • Spoke Holes: 32H • Center to Flange (Right): 44mm • Center to Flange (Left): 44mm

- Road racing/training rim based on the Aerohead rim with a wider footprint that allows for a more aerodynamic rim/tire combination when paired with a 23c tire - Tire profile mimics the characteristics of a tubular - Hollow core aluminum with machined sidewalls for improved braking - O/C version: Off center design allows for dramatically improved spoke tension on a dished wheel, the A23 OC allows for a more aerodynamic rim/tire combination when paired with a 23c tire - US made A23 rims now feature a tubeless ready design. Combine that with the new 21mm wide Velotape kit and you have a fool-proof Road and Cyclocross tubeless tire setup

Direct power meets simplicity—running smoothly day-in and day-out. The 350 hub was developed according to the credo: Reliability meets simplicity. The simultaneous engagement of the ratchets and the resulting large engagement area provide reliability. The plugged construction allows easy maintenance without the need for tools. Adaptation to different axle standards or modification of the engagement angle is also possible with just a few manual steps.

Built for bashing, whether on a gravity shred sled or fully loaded bikepacking rig, WTB's KOM Tough rims are extruded from top-tier alloy to provide utmost durability at a reasonable weight. Their legendary I-Beam construction has evolved to further reinforce the rim with dual support beams that provide increased strength and stiffness for the world’s most aggressive riders. KOM Tough rims are proven on the toughest tracks of the Enduro World Series, depended on for daily trail rides, and trusted while bikepacking in remote regions of the world. Features: - TCS 2.0 creates a more robust, easily installed and dependable tubeless system. - A recessed channel along the center of TCS 2.0 rims allows installation of the all-new Solid Strip, which prevents tubeless tape from sagging at the spoke holes and results in a smooth, consistent interface between the tire and rim. - 4D angled spoke drilling eliminates binding and lateral loading, and disperses tension more evenly over a greater area.

WTB's proprietary 4D spoke drilling prevents binding and lateral loading of the spokes, while the spoke bed itself has been updated to provide a more compatible interface between the spoke and rim. Integration of the all-new Solid Strip on our TCS 2.0 rims delivers the easiest to mount and most reliable tubeless system we've ever made. Features: - TCS 2.0 creates a more robust, easily installed and dependable tubeless system. - A recessed channel along the center of TCS 2.0 rims allows installation of the all-new Solid Strip, which prevents tubeless tape from sagging at the spoke holes and results in a smooth, consistent interface between the tire and rim. - 4D angled spoke drilling eliminates binding and lateral loading, and disperses tension more evenly over a greater area

High quality sealed bearing hub is available in traditional and modern configurations. - Steel axle, aluminum end caps with steel knurled contact surfaces - Same proven driver mechanism as higher priced models - Spoke Interface: J-Bend - Hub/Brake Compatibility: 6-Bolt Disc - Skewer Included: No - Bearing Type: Sealed Cartridge

A 30mm welded Enduro rim developed for the fastest EWS rider. Enduro may be young as a discipline, but at its core is the intrinsic need of riders to ride burlier terrain faster and faster. Something that MTB has been all about since the beginning. The EX 511 rim is the perfect tool for this quest. It comes with all the technology that has delivered many EWS wins and packs it in a 30mm-wide profile, ready to go burlier, faster.

The new standard for durability and price. - Patented Star-Ratchet system - Contact-free seals and high precision build guarantee smooth bearings - Press-fit end caps allow tool-free maintenance and conversion

The new standard for durability and price. - Patented Star-Ratchet system - Contact-free seals and high precision build guarantee smooth bearings - Press-fit end caps allow tool-free maintenance and conversion