Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Other
$9.00
- Replacement chain pins for Shimano 11-speed chains
- Compatible with CN7900/7801 chains
- 3 pins per pack
$9.00
This replacement bolt unit ensures your I-Spec II shifters, dropper levers, and/or brake levers are securely fastened. Make sure your controls are ready to rip.
$10.00
These are replacement Shimano Rear Derailleur Cage Plates for Deore XT RD-M8000-SGS derailleurs. If these plates are bent or damaged, shifting performance deteriorates significantly leading to skipping chains, mis-shifts, and ghost shifting. Restore the smooth, precise shifting you've come to expect from your XT derailleur.
*Be sure to choose the correct plate if you only need the inner or the outer plate.
$10.75
Shimano STI lever hoods.
- Fits Ultegra ST-6700 levers only
$13.99
- Wears and functions like other links on the chain
- SIL-TEC surface treatment
- Tool free installation possible
- TL-CN10 is available as SM-CN900-11
- Single use
$22.00
Shimano Rear Derailleur Pulley Assemblies
$8.00
Hose fittings fit many of SRAM's newest hydraulic brake models.
- Fittings are backwards compatible with older SRAM and Avid hydraulic brakes
$17.00
Power links provide tool free chain assembly.
- Chain Compatibility: SRAM
- Reusable: No
$25.00
- Lever Internals Gen 2 Guide R/RE/DB5|Code R Qty 1
$49.00
Original equipment rear derailleur pulleys for SRAM rear derailleurs. Fits X01, X01DH, X1, GX 1x11, NX, Force CX1, Force 1, Rival 1, Apex 1 Derailleurs.
- Wide-narrow pulley tooth profile holds the chain better
- Stainless steel sealed cartridge bearings
$10.00
Frame clamps can be used to attach fender stays to suspension forks and other frame points of the bicycle as needed.
- Includes 2 clamps and screws
$4.00
RockShox Rear Shock Parts
$6.00
Eyelet Bushings for repair and maintenance of Rockshox rear shocks.
$18.00
RockShox 35mm Seal Kit
$20.00
RockShox 35mm Seal Kit
$29.00
Hose Kits, Barbs and Strain Relief for Servicing Reverb Lines.
$31.00
Replacement top caps and parts for RockShox forks.
$38.00
38mm Suspension Fork Parts
$7.50
Notched binder bolts for frames with integrated seat collars.
Details:
CroMoly steel bolts
Three lengths available: 16, 19 and 21mm
8mm diameter
$14.99
The Problem Solvers Single Chainring Bolts include 5 chainring bolts and nuts that are 6mm wide. This is the right size for most single-chainring setups. These chainring bolts are made of either aluminum, stainless steel, or chromoly.
$19.99
The Problem Solvers Shifter Boss Covers are perfect for covering up the down-tube shifter bosses when you're converting a frame with them to a singlespeed/fixie setup. They're made of light, durable aluminum and sport a nice polished finish.
$10.19
Ditch the zip ties and clean up the look of your cables with Origin-8's Clamp-on Cable Stop. Available in a variety of diameters for different sized round frame tubes, the cable stop bolts on and provides a channel to run rear brake or derailleur housing to hold it securely in place. It's made of lightweight CNC'd aluminum.
$12.99 - $13.99
Origin-8's Pro Cable Guide Pulley fulfills all your special cable routing needs. Designed to clamp onto seat tube, it allows you to route your cable for bottom pull front derailleurs. Uses a sealed bearing pulley.
$14.49
• Converts Braze-on front Derailleurs to clamp on
• Lightweight forged alloy
• Weight: 28g
NEW: Please refer to our chart for the correct adapter size you need.
Disc brake adaptors available for Shimano, SRAM, Hope, Hayes, Formula, etc. rotors:
CNC machined from 6061 T6511 aluminum. Machined surfaces allow for better caliper alignment and a more rigid brake setup.
The Post Mount standard is universal for front and rear brakes.
Frames and forks that use the post-mount brake interface use a stock size varying from 160mm to 203mm. It’s important to check your frame and fork for the default post mount size before ordering a suitable adapter.
To calculate the size of the required adapter, subtract the frame/fork stock mount size from the desired rotor size.
If you’re using brakes with large calipers (Magura MT5/MT7, Hope Tech V4, Hayes Dominion A4, etc.), please also order a low profile (button head) bolt kit to ensure correct fitment.
Our disc brake adapters do not come with mounting bolts but if needed, we have sets of 4 bolts available.
Not currently compatible with TRP 203mm rotors.
$16.00
Seal kit for Marzocchi Rail damper found in the Marzocchi Z2 fork.