Parts

Hope Pad Clip • Fits Tech and Tech Evo M4, X2, and V2 Brakes

- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver

Replacement reservoir cap screw for Hope brakes.

Sunlite's Cable End Button replaces the worn out piece that goes between your brake cable and the brake lever body. Replacing it along with cables and housing helps add new life to your brakes and shines u the bike, too!

RaceFace X-Type Bottom Bracket Outer Race Seal - Replacement for cracked or broken X-Type outer race seals - Sold each

- Aheadset preload adjusting bolt

Interlok spacers nest into the lip of Cane Creek headset uppers for a rock solid, flex-free fit. - Composite construction

- For chain and derailleur alignment - 20 per bag

- w/Nut - 1-3/4-inch

- 8x1mm Allen head

- Model: Replacement bolt - Compatibility: Allen, M5x16

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

- Hoods with (FD) are Flight-Deck compatible

This is a replacement Brake Hose Cover for the Lever End of Shimano BH90-SBM, BH90-SB levers. - Covers brake hose fitting at the brake lever

- Crank dust cap - Works with most three-piece crank models

Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.

- For MTB levers - 7mm x 1mm - Aluminum construction

KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains

- Rubber - Color: Black

- Aluminum w/lock nut and mount - Slotted mount design

- Chrome - Sold individually

- M8 Top Plate Bolt

- Model: Derailleur Bolt & Nut - Compatibility: Mounts rear bracket to frame

Finish off that great road bar tape job with Origin-8's Rubber End Plugs. These plugs come in a variety of colors to dress up your rig and fit most handlebars.

- Routes cables underneath the bottom bracket - Will not rust or corrode

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

- Alloy spacer converts an 8-speed rear hub to use a 7 speed cassette - Range: 4mm - Color: Silver

Hope Disc Brake Hose Small Parts · This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder

- Hayes service parts for calipers - Rebuild kits include: (2) caliper pistons with square profile seals, transfer port o-ring, and caliper bleeder with cap

Stainless steel pedal washers - Sold in pairs